Q: “Crown” can not pull out the reason?
That’s because the “crown” with threaded jamming function, the principle of jamming is “crown” made a “nut”, just need to first counterclockwise rotation! After the “crown” is popped out, it is 0 gear (clockwise rotation is manual winding), in pulling out the 1st gear to adjust the date function, and the 2nd gear is to adjust the time function. After adjusting the time, turn the crown clockwise and push it in to lock it to avoid water ingress!
Q: How to adjust the time and date of the watch
Crown pull out 1 gear to adjust the date, the second gear to adjust the time (threads jammed need to be rotated out counterclockwise first)
Precautions for adjusting the watch:
1, in case of a watch with a screwed crown, do not pull it out hard, please first rotate counterclockwise to open the locked crown, and after adjusting the time, rotate the crown clockwise and push it into the lock, so as to avoid water ingress!
2, secondly, pay attention to the mechanical watch movement’s forbidden zone in the evening 21:00-4:00 a.m. During this period, it is not suitable for week and calendar adjustment, otherwise it will damage the movement.
3, in 21:00-3:00 between please do not adjust the time counterclockwise, because in this time period week, calendar gear in the switch, long time reverse direction adjustment will damage the internal parts, other time periods clockwise, counterclockwise can be freely adjusted.
Q: Why the date is not right
The date of the watch is 24 hours to jump a frame, the early hours of the morning did not jump, the next day at noon will jump, equal to the time is slowed down 12 hours, you need to manually turn the hour hand a circle on it, if the date jumped early, the first date to the previous day, in the way through the rotation of the time to make the date jump right.
Q: Error range of mechanical watches
According to the regulations of the watch industry, the daily error of the international standard mechanical watch is within the normal range of ±30 seconds, and our shipments will be sent out after the instrument detection, and generally can be controlled within 10 seconds.
Q: Mechanical watch error and quartz watch error?
Quartz watch error 24 hours error range control 0.5 seconds, very accurate.
Mechanical watch error range specifically depends on the quality of the movement.
Domestic ordinary mechanical error range 24 hours of error range control within 50 seconds, generally in 10 seconds to 20 seconds or so.
Seagull movement, Citizen movement, Swiss ETA movement, 24-hour error range are controlled within 30 seconds, generally in 10 seconds or so. Some friends just contact mechanical watch, a hear 24 hours have 30 seconds of error, that is not a week on the error of three and a half clock clock well, here we have to pay attention to the 24-hour error range within 30 seconds is normal, not absolutely every day error 30 seconds, there may be a day of error a few seconds, there may be a day of error more than a dozen seconds in 30 seconds belongs to the normal range. Yonghang Watch Industry will test the error and correct the error before shipment, and generally it can be controlled within 10 seconds.
The accuracy of the mechanical watch will mainly depend on the stability of the oscillation cycle of the balance spring, but the oscillation stability of the balance spring is affected by 5 factors:
1, the impact of the pendulum: the degree of elasticity of the clockwork will have a direct impact on the size of the balance amplitude, the more sufficient clockwork, the more accurate the relative walk, so in the usual use, the wrist activity less words, you can manually replenish the kinetic energy.
2, the impact of positional changes: the main positional changes are changes in the plane and vertical plane, the plane has 2 (surface up and surface down) vertical only counts 3 (they are: the watch handle down, the watch handle to the left, the watch handle up) the watch handle to the right in the normal wear will not happen, so that count up to a total of 5 positions, each position so that the balance of the watch balance wheel hairspring system oscillating cycle is affected by the size of the different impacts.
3, the impact of shock vibration: violent shock vibration also has an impact on the balance wheel vibration cycle, especially low pendulum state or low frequency mechanical watches.
4, the influence of magnetic field: many mechanical watch movement parts are steel, so it is easy to be magnetized.
5, the influence of temperature change: temperature change will make the balance wheel and hairspring geometry also change, every tiny change of these key components will directly affect the oscillation cycle.
6, mechanical watches have a 2-month break-in period, after the break-in period to know the real error, the error is large can be mailed back to free correction.
There are some other factors, the case is not sealed with moisture or dust into the watch, will also affect the accuracy of the watch.
In short, it is recommended to keep the mechanical watch winding relatively full if you want the mechanical watch to be accurate. Generally the watch plane should go better than the vertical surface, keep away from magnetic fields and water, and don’t fall.
Q: The difference between alligator strap and cowhide strap
Crocodile leather strap compared to cowhide appearance more shiny and full, but also more durable, soft, breathable, comfortable to wear, etc.
Q: How about Citizen 9015 movement?
9015 is the original Citizen movement, better than the seagull movement, performance is close to the Swiss ETA movement, many of the top of the market (imitation genuine movement) is mostly modified with Citizen 9015 movement, 9015 movement is the only drawback is that the sound is a little loud.
Q: Seagull movement how?
Seagull movement and Citizen movement is most commonly used in replica watches, Seagull movement is considered the best domestic movement, is imitation of Swiss ETA movement, so its appearance and design and Swiss movement is very cognizant of the earlier years of many merchants to Seagull movement watches said to be Swiss machine.
“Seagull” brand watches since its birth in 1955 has been 64 years of development history, the birthplace of China’s first mechanical watch, China’s largest mechanical watch and movement production base, with such a background, its movement is obvious to all, the quality is certainly not bad.
What are the main differences between high quality replica watches and original watches?
Regard Prtal Berita
I have mentioned this part in the FQA on the website, you can check it there
Hello. . yuzovka
zwz4753674
https://yuzovka.org zwz4753674
Hello. . don-rem.ru
https://don-rem.ru
https://don-rem.ru zwz4967494
Hello. . yuzovka
zwz4753674
https://yuzovka.org zwz4753674
i dont see any prices of you watches
price for the watches rolex,omega,cartier enz
Let’s make tonight unforgettable… your place or mine? – https://rb.gy/es66fc?Cync
Portable balancer & Vibration analyzer Balanset-1A
Description:
Order on Allegro
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel device designed for balancing and vibration analysis of rotating mechanisms. It is ideal for balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating machinery.
Core Features and Capabilities
Vibration Measurement Mode
Tachometer: Precise rotational speed measurement (RPM).
Phase: Identifies the phase angle of vibration signals for accurate analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Thorough analysis of the vibration signal’s frequency spectrum.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Stores measurements for subsequent review.
Balancing Function
Single-Plane Balancing: Adjusts rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Determines acceptable imbalance in accordance with ISO 1940.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Charts and Diagrams
Overall Graphs: Shows overall vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Presents the frequency spectrum for detailed examination.
Additional Functions
Archive: Store and revisit past balancing data.
Reports: Automatically generate detailed balancing reports.
Rebalancing: Enables rebalancing using stored session data.
Serial Production Balancing: Perfect for mass production rotor balancing.
What’s in the Package
The package contains:
Measurement block with USB connection.
Two vibration measurement sensors.
Optical sensor (laser tachometer) with magnetic mount.
Digital weight scales.
Software (laptop not included, available for purchase).
Transport case.
Order on eBay
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Blame you for sharing this!
https://2lamour.net
It’s ever inviting to finance unalike perspectives on this topic.
I rate the effort and itemize stake into this register – it provides valuable insights and clearly gives me something to intend about.
Looking insolent to more theme like this!
Make out also – https://big-tits-land.info
Thank you for sharing this!
https://amateurxxx.one
It’s always exciting to see many perspectives on this topic.
I esteem the creation and itemize put into this register – it provides valuable insights and clearly gives me something to think about.
Looking insolent to more theme like this!
Tender thanks you an eye to sharing this!
https://gaywellington.org
It’s ever inviting to see distinguishable perspectives on this topic.
I esteem the attainment and fine points put into this notify – it provides valuable insights and indubitably gives me something to dream about.
Looking forward to more theme like this!
See also – https://biggaysingdublin.com
Eliminate Vibration Issues and Improve Equipment Performance
Vibration is a silent killer of industrial machines. Imbalance leads to worn-out bearings, misalignment, and costly breakdowns. Balanset-1A is the ultimate tool for detecting and correcting vibration problems in electric motors, pumps, and turbines.
What Makes Balanset-1A Stand Out?
– Precise vibration measurement & balancing
– Compact, lightweight, and easy to use
– Two kit options:
Full Kit on Allegro – Advanced sensors & accessories, Software for real-time data analysis, Hard carrying case
Price: 9990 zl
OEM Kit on Allegro – Includes core balancing components, Same high-quality device
Price: 8800 zl
Prevent unexpected breakdowns – Invest in Balanset-1A today!
Thank you for sharing this!
https://ca3h.com
It’s every time interesting to see many perspectives on this topic.
I esteem the effort and itemize stake into this notify – it provides valuable insights and indubitably gives me something to think about.
Looking head to more felicity like this!
Blame you after sharing this!
https://homemadegaymovies.com
It’s every time inviting to see distinguishable perspectives on this topic.
I rate the effort and fine points put into this list inform – it provides valuable insights and definitely gives me something to intend about.
Looking forward to more theme like this!
Perceive also – https://tuesdaynighttech.com
Tender thanks you after sharing this!
https://windycityblackpride.org
It’s always attractive to see different perspectives on this topic.
I increase the creation and charge rest into this post – it provides valuable insights and indubitably gives me something to dream about.
Looking insolent to more satisfy like this!
See also – https://mature-teacher-movies.info
Tender thanks you championing sharing this!
https://hardcorehdtube.com
It’s ever after inviting to espy distinguishable perspectives on this topic.
I increase the effort and detail put into this register – it provides valuable insights and indubitably gives me something to dream about.
Looking head to more content like this!
Make out also – https://mature-teacher-movies.info
Blame you after sharing this!
https://analxxx.one
It’s ever after exciting to finance unalike perspectives on this topic.
I increase the creation and itemize stake into this notify – it provides valuable insights and clearly gives me something to intend about.
Looking head to more theme like this!
Say thank you you for sharing this!
https://siteslikespankwire.com
It’s always inviting to finance different perspectives on this topic.
I rate the effort and fine points rest into this notify – it provides valuable insights and indubitably gives me something to dream about.
Looking forward to more satisfy like this!
See also – https://ct-ctst.com
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Details of the Balanset-1A
The Balanset-1A is a versatile, dual-channel instrument engineered for rotor balancing and vibration analysis. Perfect for use with rotors like crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating equipment.
Primary Functions and Features
Vibrometry Mode
Tachometer: Exact measurement of rotational speed (RPM).
Phase: Determines the phase angle of the vibration signal for precise analysis.
1x Vibration: Measurement and analysis of the dominant frequency component.
FFT Spectrum: Thorough analysis of the vibration signal’s frequency spectrum.
Overall Vibration: Tracks the overall vibration level.
Measurement Log: Stores data for subsequent analysis.
Balance Mode
Single-Plane Balancing: Balances rotors in a single plane to reduce vibration.
Two-Plane Balancing: Dynamic balancing of rotors across two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Enables continuation of the previous balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Graphs and Diagrams
Overall Graphs: Displays general vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Additional Capabilities
Archive: Retain and retrieve previous balancing sessions.
Reports: Create comprehensive balancing reports.
Rebalancing: Allows easy rebalancing with archived data.
Serial Production Balancing: Ideal for rotor balancing in production environments.
In the Box
The Balanset-1A kit includes:
A measurement module with interface.
Two vibration transducers.
Optical sensor (laser tachometer) with a magnetic holder.
Digital weight scales.
Software (laptop not included, available for purchase).
Protective transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Description of the Balanset-1A Device
The Balanset-1A is a highly portable, dual-channel device tailored for rotor balancing and vibration analysis. It’s ideally suited for balancing rotors like crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating machines.
Key Features and Capabilities
Vibrometry Mode
Tachometer: Accurate measurement of rotational speed (RPM).
Phase: Determines the phase angle of the vibration signal for precise analysis.
1x Vibration: Measurement and analysis of the primary frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Monitoring the total vibration level.
Measurement Log: Stores data for subsequent analysis.
Balance Mode
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Dynamic adjustment of rotors in two planes.
Polar Diagram: Displays imbalance on a polar diagram for accurate weight placement.
Last Session Recovery: Provides the option to resume the last balancing session.
Tolerance Calculator (ISO 1940): Computes allowable imbalance as per ISO 1940 standards.
Grinding Wheel Balancing: Corrects grinding wheel imbalance with three counterweights.
Graphs and Diagrams
Overall Graphs: Displays general vibration levels.
1x Graphs: Shows the primary frequency vibration characteristics.
Harmonic Graphs: Analyzes the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Additional Functions
Archive: Archive and access prior balancing sessions.
Reports: Create thorough reports on balancing.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Included with the Device
The Balanset-1A kit includes:
A measurement block with an interface.
Two vibration sensors.
Optical laser tachometer with magnetic mount.
Digital scales.
Software (Note: Laptop not included, available as an additional order).
Protective transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Eliminate Vibration Issues and Improve Equipment Performance
Vibration is a silent killer of industrial machines. Imbalance leads to worn-out bearings, misalignment, and costly breakdowns. Balanset-1A is the ultimate tool for detecting and correcting vibration problems in electric motors, pumps, and turbines.
What Makes Balanset-1A Stand Out?
– Precise vibration measurement & balancing
– Compact, lightweight, and easy to use
– Two kit options on Machineryline:
Full Kit: Balanset-1A device, Vibration sensors, Software & mounting accessories, Hard carrying case
Price: €1751
OEM Kit: Balanset-1A device, Basic sensors, Software
Price: €1561
Prevent unexpected breakdowns – Invest in Balanset-1A today!
Description:
Order on Machinio
Or save €100 on vibromera.eu with promo code VB100!
Description of the Balanset-1A Device
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Supplied with
The Balanset-1A Full package includes:
Measurement block with USB connection.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic base.
Software (laptop can be ordered separately).
Electronic scales.
Plastic transport case.
Price:
Full: 1751 EUR
OEM kit: €1561
Order on Machinio
Or save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Balanset-1A Overview
The Balanset-1A is a compact, dual-channel device designed for balancing and vibration analysis of rotating mechanisms. It is ideal for balancing rotors such as crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating machinery.
Main Functions and Features
Vibrometer Function
Tachometer: Precise RPM measurement.
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Analyzes and measures the primary frequency component.
FFT Spectrum: Detailed frequency spectrum analysis of the vibration signal.
Overall Vibration: Monitors overall vibration levels.
Measurement Log: Archives data for future analysis.
Balancing Function
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Visualizes rotor imbalance on a polar chart for accurate placement of corrective weights.
Last Session Recovery: Allows the previous balancing session to be resumed.
Tolerance Calculator (ISO 1940): Calculates allowable rotor imbalance based on ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Graphs and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Visualizes the effects of harmonic frequencies.
Spectral Graphs: Graphically shows the frequency spectrum for in-depth analysis.
Extra Features
Archive: Save and access past balancing sessions.
Reports: Automatically generate detailed balancing reports.
Rebalancing: Facilitates rebalancing with previously saved data.
Serial Production Balancing: Suitable for balancing rotors in mass production settings.
Package Contents
Balanset-1A is supplied with:
A measurement module with interface.
Two accelerometers.
Optical sensor (laser tachometer) with magnetic mount.
Electronic balance scales.
Software (Note: Laptop not included, available as an additional order).
Transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Get a €100 discount on the official website vibromera.eu with promo code VB100
Description:
Order on eBay
Or save €100 on vibromera.eu with promo code VB100!
Balanset-1A Device Description
The Balanset-1A is a versatile, dual-channel instrument engineered for rotor balancing and vibration analysis. Perfect for use with rotors like crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating equipment.
Package Contents
The Balanset-1A Full kit includes:
Measurement block with USB connection.
A pair of vibration sensors.
Optical sensor (laser tachometer) with magnetic base.
Software (laptop not included, available for purchase).
Digital weight scales.
Hard plastic carrying case.
Price:
Full: 1751 EUR +IVA
OEM: 1561 EUR +IVA
Order on eBay
Or save €100 on vibromera.eu with promo code VB100!
Description:
Order on Machinio
Or save €100 on vibromera.eu with promo code VB100!
Details of the Balanset-1A
The Balanset-1A is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Package Contents
The full kit package contains:
A measurement unit with interface connectivity.
Two vibration transducers.
Optical sensor (laser tachometer) with a magnetic holder.
Software (computer not included, available as an option).
Digital scales.
Transport case.
Price:
Full kit: €1751
OEM kit: €1561
Order on Machinio
Or save €100 on vibromera.eu with promo code VB100!
Portable balancer & Vibration analyzer Balanset-1A
Description:
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro
Description of the Balanset-1A Device
The Balanset-1A is a versatile, dual-channel instrument engineered for rotor balancing and vibration analysis. Perfect for use with rotors like crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotating equipment.
Core Features and Capabilities
Vibration Meter Mode
Tachometer: Accurate RPM measurement.
Phase: Determines the phase angle of the vibration signal for precise analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Comprehensive analysis of the vibration frequency spectrum.
Overall Vibration: Keeps track of overall vibration levels.
Measurement Log: Stores data for subsequent analysis.
Balance Function
Single-Plane Balancing: Balances rotors in one plane to minimize vibration.
Two-Plane Balancing: Dynamic rotor balancing in two planes.
Polar Diagram: Represents imbalance on a polar chart for precise correction weight placement.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Utilizes three counterweights to balance grinding wheels.
Graphs and Diagrams
Overall Graphs: Represents general vibration levels.
1x Graphs: Displays vibration patterns at the main frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Visual representation of the frequency spectrum for thorough analysis.
Additional Capabilities
Archive: Archive and access prior balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Allows easy rebalancing with archived data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
Package Contents
The Balanset-1A package includes:
A measurement unit with interface connectivity.
Two vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Electronic scales.
Software (computer not included, available as an option).
Plastic transport case.
Price:
7500 PLN / 44250 CZK / 1751 EUR / 715000 HUF Full kit Order on Allegro
6700 PLN / 39550 CZK / 1561 EUR / 640000 HUF OEM kit Order on Allegro